Issue
I am working in Ubuntu. I am trying to make two kernel modules which uses each other functions. My problem is that I got modules properly compiled, but the symbol is not resolved for one of them.
To make things simple, let's call these modules as m1
and m2
.
m2 is exporting function void func_m2(void)
. The m1
is calling this function. Both modules properly compile.
After it all compiles, I need to load first the m2
module (because it has exported func_m2
function) and afterwards m1
module. So, let's make it:
volodymyr@sv1:~/development/kmodules/m2$ sudo insmod ./m2.ko
Now, lets load m1
module which is trying to use func_m2
:
volodymyr@sv1:~/development/kmodules/m1$ sudo insmod ./m1.ko
insmod: error inserting './m1.ko': -1 Unknown symbol in module
Following is what I see in logs:
volodymyr@sv1:~/development/kmodules/m1$ dmesg | tail
[ 3938.166616] Loading m2 module ...
[ 3963.078055] m1: no symbol version for func_m2
[ 3963.078059] m1: Unknown symbol func_m2
So, it seems like the references to symbol func_m2
is not resolved. Interesting. Let's check if it is present in symbol table:
volodymyr@sv1:~/development/kmodules$ cat /proc/kallsyms | grep 'func_m2'
ffffffffa00530d0 r __ksymtab_func_m2 [m2]
ffffffffa00530e8 r __kstrtab_func_m2 [m2]
ffffffffa00530e0 r __kcrctab_func_m2 [m2]
ffffffffa0053000 T func_m2 [m2]
000000004edd543f a __crc_func_m2 [m2]
As you can see, the func_m2
is actually present in symbol table. So why m1
can't be loaded?
I have installed properly Linux headers for my kernel and Linux sources. I did not make any modifications in kernel, it is untouched, and it's version is: 2.6.31-16-generic (I run x64)
Now, to show you full picture I am putting here the source code and Makefile I used for this test for both m1
and m2
modules.
m1
module:
m1.c:
#include <linux/module.h>
#include <linux/kernel.h>
extern void func_m2(void);
int hello_start(void)
{
printk(KERN_INFO "Loading m1 module ...\n");
func_m2();
return 0;
}
void hello_end(void)
{
printk(KERN_INFO "Unloading m1 ...\n");
}
module_init(hello_start);
module_exit(hello_end);
MODULE_LICENSE("GPL");
Makefile:
obj-m := m1.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
m2
module:
m2.c:
#include <linux/module.h>
#include <linux/kernel.h>
int hello_start(void)
{
printk(KERN_INFO "Loading m2 module ...\n");
return 0;
}
void hello_end(void)
{
printk(KERN_INFO "Unloading m2 ...\n");
}
void func_m2(void)
{
printk(KERN_INFO "This a function in m2\n");
}
module_init(hello_start);
module_exit(hello_end);
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(func_m2);
Makefile:
obj-m := m2.o
export-objs := m2.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
Basically my question is: Why can't m1
be loaded?
It would be helpful if someone could answer.
Solution
Here are some issues I found with your code:
(a). Your initialization and termination functions should be declared static and properly identified. For example, in m1.c -
static int __init hello_start(void)
{
printk(KERN_INFO "Loading m1 module ...\n");
func_m2();
return 0;
}
static void __exit hello_end(void)
{
printk(KERN_INFO "Unloading m1 ...\n");
}
Repeat this for m2.c
(b). Build both of your modules together, using the same Makefile. I bet if you look closely at the output from your existing Makefile for m1.c, you will see a warning indicating that func_m2() is undefined. Anyhow, the consolidated Makefile should look like -
SRCS = m1.c m2.c
OBJS = $(SRCS:.c=.o)
obj-m += $(OBJS)
EXTRA_CFLAGS = -O2
all:
$(MAKE) -C /lib/modules/`uname -r`/build M=$(PWD) modules
clean:
$(MAKE) -C /lib/modules/`uname -r`/build M=$(PWD) clean
$(RM) Module.markers modules.order
After both modules are built, run insmod on 'm2.ko' before issuing the insmod for 'm1.ko'. Check results via dmesg.
Also, over here I am assuming that both m1.c and m2.c are in the same directory. Even if they are in different directories, this technique will work, but it will be messy. If they are in different directories, do the following.
I did little research and found a way to build modules in separate directories. The example I used is much simpler than what you have, but perhaps it is adaptable.
I have following manifest of files in a directory called ExportSymbol...
$ ls -CFR
.:
include/ Makefile mod1/ mod2/
./include:
m2_func.h
./mod1:
Makefile module1.c
./mod2:
Makefile module2.c
The m2_func.h appears as:
#ifndef M2_FUNC_H
#define M2_FUNC_H
void m2_func(void);
#endif
The top-level Makefile appears as:
obj-y := mod1/ mod2/
all:
$(MAKE) -C /lib/modules/`uname -r`/build M=$(PWD) modules
clean:
$(MAKE) -C /lib/modules/`uname -r`/build M=$(PWD) clean
$(RM) Module.markers modules.order
The Makefile and module1.c, which are in mod1/, appear as:
SRCS = module1.c
OBJS = $(SRCS:.c=.o)
obj-m += $(OBJS)
EXTRA_CFLAGS += -I${PWD}/include
all:
$(MAKE) -C /lib/modules/`uname -r`/build M=$(PWD) modules
clean:
$(MAKE) -C /lib/modules/`uname -r`/build M=$(PWD) clean
$(RM) Module.markers modules.order
#include <linux/module.h>
#include <linux/kernel.h>
static int __init hello_start(void)
{
printk(KERN_INFO "Loading m1 module ...\n");
m2_func();
return 0;
}
static void __exit hello_end(void)
{
printk(KERN_INFO "Unloading m1 ...\n");
}
module_init(hello_start);
module_exit(hello_end);
MODULE_LICENSE("GPL");
The Makefile and module2.c, which are in mod2/, appear as:
SRCS = module2.c
OBJS = $(SRCS:.c=.o)
obj-m += $(OBJS)
EXTRA_CFLAGS += -I${PWD}/include
all:
$(MAKE) -C /lib/modules/`uname -r`/build M=$(PWD) modules
clean:
$(MAKE) -C /lib/modules/`uname -r`/build M=$(PWD) clean
$(RM) Module.markers modules.order
#include "m2_func.h"
#include <linux/module.h>
#include <linux/kernel.h>
static int __init hello_start(void)
{
printk(KERN_INFO "Loading m2 module ...\n");
return 0;
}
static void __exit hello_end(void)
{
printk(KERN_INFO "Unloading m2 ...\n");
}
void m2_func(void)
{
printk(KERN_INFO "This a function in m2\n");
}
module_init(hello_start);
module_exit(hello_end);
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(m2_func);
NOTE: I can't use your makefile as it generates *.ko per each c file. The Makefile is doing its job. A 'ko' file is a kernel object file; you will have one for each .c source file. There's no way around this. If you do not want multiple ko-files, then put all of your code in one source file.
Answered By - Ashish Ahuja