Issue
I am trying to use an rplidar to write lidar scan data to a csv, and it works fine when it is plugged into my PC via USB - however, as soon as I plug it into my Raspberry Pi(3b+), it throws multiple errors despite the health reporting being fine. If you knows what the cause of this might be, the assistance would be greatly appreciated! Python Code and traceback below!
Python:
from rplidar import RPLidar
from math import sin, cos, radians
import multiprocessing as mp
import csv
lidar = RPLidar("/dev/ttyUSB0")
def scan():
try:
for scan in enumerate(lidar.iter_scans(max_buf_meas=False)):
list_version_data = list(scan)
for data in list_version_data:
if isinstance(data, list):
for indiv_data_points in data:
if isinstance(indiv_data_points, tuple):
list_indiv_data_points = list(indiv_data_points)
list_indiv_data_points.pop(0)
# print(list_indiv_data_points)
# Angle is first, distance is second
# Angle is in degrees, distance is in mm
angle = list_indiv_data_points[0]
distance = list_indiv_data_points[1]
length = distance
angle = radians(angle)
x, y = (length * cos(angle)), (length * sin(angle))
print(str(x), str(y))
with open("lidar03.csv", "a") as f:
writer = csv.writer(f)
writer.writerow([x, y])
elif isinstance(data, int):
print("int")
if KeyboardInterrupt:
lidar.stop()
lidar.stop_motor()
lidar.disconnect()
scan()
except Exception as e:
lidar.stop()
lidar.stop_motor()
lidar.disconnect()
lidar.reset()
print("error")
print(e)
pass
if __name__ == "__main__":
print(lidar.get_health())
print(lidar.get_info())
print(lidar.reset())
scan()
Full Traceback:
('Good', 0)
{'model': 24, 'firmware': (1, 29), 'hardware': 7, 'serialnumber': '95BD99F6C9E59AD4C5E59CF7696F3414'}
None
Traceback (most recent call last):
File "/home/garb/robot/TESTING/lidar_testing/live_write_csv.py", line 11, in scan
for scan in enumerate(lidar.iter_scans(max_buf_meas=False)):
File "/home/garb/.local/lib/python3.9/site-packages/rplidar.py", line 357, in iter_scans
for new_scan, quality, angle, distance in iterator:
File "/home/garb/.local/lib/python3.9/site-packages/rplidar.py", line 300, in iter_measurments
status, error_code = self.get_health()
File "/home/garb/.local/lib/python3.9/site-packages/rplidar.py", line 245, in get_health
dsize, is_single, dtype = self._read_descriptor()
File "/home/garb/.local/lib/python3.9/site-packages/rplidar.py", line 189, in _read_descriptor
raise RPLidarException('Incorrect descriptor starting bytes')
rplidar.RPLidarException: Incorrect descriptor starting bytes
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/garb/robot/TESTING/lidar_testing/live_write_csv.py", line 53, in <module>
scan()
File "/home/garb/robot/TESTING/lidar_testing/live_write_csv.py", line 43, in scan
lidar.reset()
File "/home/garb/.local/lib/python3.9/site-packages/rplidar.py", line 273, in reset
self._send_cmd(RESET_BYTE)
File "/home/garb/.local/lib/python3.9/site-packages/rplidar.py", line 179, in _send_cmd
self._serial_port.write(req)
File "/home/garb/.local/lib/python3.9/site-packages/serial/serialposix.py", line 615, in write
raise PortNotOpenError()
serial.serialutil.PortNotOpenError: Attempting to use a port that is not open
Solution
I solved it: I used pip3 install rplidar
when the package I should have used was sudo pip3 install rplidar-roboticia
. There are multiple packages for rplidar out there and this was the only one I found that worked really well.
Answered By - Garberchov Answer Checked By - Mildred Charles (WPSolving Admin)